SDXX 119战术速脱防弹衣

产品简介/Intoduction

公司设计生产的轻质防弹衣，适合于各种不同防弹要求，有全防护式、背心式、隐版式、外穿式、漂浮式、快速解除式及针对女士专用的女式防弹衣等上百种型号样式，亦可依据客户要求求进行特殊用途的设计制造。主要防弹材料采用芳纶无纬布、芳纶机织布或PE无纬布；芯片制造采用专用的自动裁切设备和防水热合设备，具有防水、防潮、防热、防紫外线、耐高温性能，根据公安部颁布的GA141-2010《警用防弹衣》新标准要求，公司的产品在全项测试中全部一次通过。

Our light bulletproof vests can used for all kinds of ballistic protection requirements； more than one hundred types foryourchoice：includingfullprotectionbulletproofvest， general bulletproof vest， concealable bulletproof vest， outer bulletproof vest， floating bulletproof vest， fast-removable bulletproof vest and female bulletproof vest for women， etc.We also can design and manufacture the bulletproof vest for special use based on our clients'actual demand.The main balls tic materials are Aramid UD fabric， Aramid woven fabric and PE fabric； the panel was made by special auto-cutting equipment and waterproof heat-seal equipment.It has waterproof， moisture proof， heatproof， UV resistance and high temperature resistance， According to the new standard requirement of GA 141-2010《Bulletproof Vest for Military》published by the Ministry of Public Security of China， Our products pass all kinds of quality testing at one time.

产品特点/Proper tes

根据客户需求选用防弹材料，包括芳纶和PE，均可达到相应的防御级别。所有防弹衣款式均可带有防弹插板兜及其它附属部分，

According to customer's requirements， whether you need Polyethylene(UHMWPE) or Aramid， the same goes for level of ballistic protection.All the vests maybe supplied with pockets for ballistic plates and other attachments.

可通过插入防弹插板达到更高的防弹级别。

By adding hard ballistic plates in the front and back， it can get a higher level of protection，

产品分类/Different types of the body armor

防护级别：由于子弹的能量和威胁程度不同，

GA141-2010标准将防弹衣分为GA-1级到GA-6级的6个不同级别：美国

NIJ 0101.06则将其分为NIJI A、I、I A、Ⅲ、IV级及特殊类型的6个级别。

By different protection level：In China， according to the GA 141-2010 standard， the bulletproof vests are divided into 6 levels：

GA-1toGA-6； In USA， according to the NIJ 0101.06 standard， there are six levels：NIJI I A， II， III A， III， IV and the special one.

所用材料：GA1~GA-3级所用材料为芳纶无纬布和PE无纬布，为纯软质防弹衣，高于GA-3级的防弹衣需放置硬质陶瓷复合胸插板， 所以称其为半软质防弹衣； NIJI A、II、ⅢA为纯软质防弹衣； 高于I A级的防弹衣需放置硬质陶瓷复合胸插板， 所以称其为半软质防弹衣，

Bythedifferentballisticmaterial：belowandcontainthelevelGA-3andtheNIJIIIA， the vests are made from aramid UD fabric Or PEU D， they are Soft bulletproof vest； above the level GA-3andNIJIIIA， we must add the hard ceramic plates to the vests to provide a higher protection， so they are half-soft bulletproof vest.